begin stekkerding

stekkerding/stekkerding.scad

@@ -0,0 +1,108 @@
+// asdfadsf
+
+radius = product_of_the_triangle_side_lengths / area_of_the_triangle_multiplied_by_4;
+
+FN=80*1;
+
+width_shortest = 40;
+width_longest = 60;
+height = 40;
+wall_thickness = 3;
+
+max_length = 30;
+
+// Gotta do some mathematics
+
+triangle_height = (width_longest - width_shortest) / 2;
+triangle_width = height / 2;
+
+slanted_side = sqrt(pow(triangle_height, 2) + pow(triangle_width,2));
+
+product_triangle_sides = slanted_side * slanted_side * height;
+triangle_area = (height*triangle_height)/2;
+
+radius_side = product_triangle_sides / (4 * triangle_area);
+
+echo(str("Radius: ", radius_side));
+
+module body(radius_sides, body_height, body_width, inner){
+	intersection(){
+		intersection(){
+			translate([0,0,-body_height/2]){
+				cube([body_width,100,body_height]);
+			}
+			union(){
+				translate([radius_sides,0,0]){
+					rotate([-90,0,0]){
+						cylinder(h=100, r=radius_sides, $fn=FN);
+					}
+				}
+				translate([body_width-radius_sides,0,0]){
+					rotate([-90,0,0]){
+						cylinder(h=100, r=radius_sides, $fn=FN);
+					}
+				}
+
+			}
+		}
+		union(){
+			translate([0,radius_sides,-body_height/2]){
+				cube([body_width,100,body_height]);
+			}
+			if (inner == 1) {
+				translate([0,radius_sides,0]){
+					rotate([0,90,0]){
+						cylinder(h=100, r=radius_sides, $fn=FN);
+					}
+				}
+			} else {
+				translate([0,0,-body_height/2]){
+					cube([body_width,100,body_height]);
+				}
+			}
+		}
+	}
+}
+
+module shell(){
+	intersection(){
+		difference(){
+			body(radius_side + wall_thickness*2, height + wall_thickness*2, width_longest + wall_thickness*2);
+			translate([wall_thickness, wall_thickness, 0]){
+				body(radius_side, height, width_longest, 1);
+			}
+		}
+		translate([0,0,-(height+wall_thickness*2)/2]){
+				cube([width_longest+ wall_thickness*2,max_length,height+wall_thickness*2]);
+		}
+	}
+}
+
+module screwdown(){
+	difference(){
+		cube([15+radius_side,15,wall_thickness]);
+		translate([7.5,7.5,0]){
+			screw_hole();
+		}
+	}
+}
+
+module screw_hole() {
+	// screw head that I measured maxes at 7mm
+	// screw thread is 3.5 mm
+	head = 7;
+	thread = 3.5 + 0.5;
+
+	translate([0,0,-20]){
+		cylinder(h=30, r=thread/2, $fn=FN);
+	}
+	translate([0,0,btn-(thread/2)]){
+		cylinder(h=head-(thread/2), r1=thread/2, r2=head);
+	}
+}
+
+
+shell();
+translate([-15,0,-(height+wall_thickness*2)/2]){
+	screwdown();
+}